31 product(s) found for "1:10 Landrover Parts"
  • Bumper Step Type 1
    Bumper Step Type 1
    £2.00
    While taking pictures of a local landrover owners vehicle, I noticed he had steps fitted, and thought 'Hey' I like those so set about making a set. While they are only small I tried to get as much detail into them as I could including the spiky grip tread bits, so they looked like the real thing. These should fit most bumpers, providing they have a flat underside and can either be glued or screwed it's up to you, and have included a picture of them on my under construction land rover, so you can...
    Details
  • Front Bumper type 2
    Front Bumper type 2
    £3.00
    This is a replacement front bumper for the D90 styrene body and unlike the other one I make which is a more traditional version, this is a more modern version that incorporates a place for a winch. It was based on pictures I found on the internet but I tweaked the design so that the commonly used 3 racing winch fits into it, with just the roller fairlead sticking out the front, or if just for appearance one of my static winches. While it doesn't fit directly to the body, its fitted to the chassis...
    Details
  • Fuel filler type 2
    Fuel filler type 2
    £2.50
    This is one of those parts that I thought just finishes off a scale land rover, a fuel filler cap. I noticed on earlier models, especially the D90 that it had the fuel filler cap between the door and rear wheel arch, plus it was rectangular instead of oval at the top so set about making. For this to fit you need to mark out and cut a slot for this to fit behind, then glue it behind, (I tend to prefer a quick setting epoxy) then add bit of model filler just to smooth the join, and its ready to be...
    Details
  • Gelande Sports Seat Back
    Gelande Sports Seat Back
    £5.00
    This was one of those after thoughts I had after I made my new sports seat and that was to fit those to a gelande interior was a lot of work, so decided to make a replacement back only as the old seat back just slots into place, so tweaked my design a bit and built a jig for drilling mounting holes and here we have it. Apart from a small amount of clean up work and needing a coat of paint to match your existing interior, plus you might need to drill the two round mounting holes in the interior out...
    Details
  • Land Rover Front Bumper type 1
    Land Rover Front Bumper type 1
    £2.50
    This is a replacement front bumper for the D90 styrene body and a direct reproduction of the real steel standard bumper that land rovers have right down to the fully shaped end caps with detail on the top. It comprises of a cut to length piece of styrene tube, a pair of end caps and fixing brackets. As for fixing the brackets they come un-drilled for a universal fixing and being HIPS it can all be stuck together like a normal model kit once drilled and fitted to your chassis rails. This is made from...
    Details
  • Land rover Front Grill Type 1
    Land rover Front Grill Type 1
    £4.00
    This is my new injection moulded front grill replacement for the styrene Landrover D90 body that's widely available. This is now a tweaked version of the previous new grill as its now made in black nylon composite, plus I have added lugs to the main grill which allow it to be push fitted to the body, (the holes do need enlarging slightly on the body) and the two headlight units have M3 screws to hold them in place, (which also need enlarging) but it makes fixing it for you much easier. Shape wise...
    Details
  • Land Rover Front Overrider bar type 1
    Land Rover Front Overrider bar type 1
    £2.00
    This is something I spotted on a land rover locally an over rider bar as it is called, so being quite a simple apart set about making one as a cosmetic addition. Its injection moulded out of HIPS so can be stuck to the front bumper I make using polystyrene cement model glue and is something you can drape a chain or rope around for that more scale look. This is made from white injection moulded HIPS and as no mould release is needed it can be glued to the bumper and then painted straight from the...
    Details
  • Land Rover rear fuel filler
    Land Rover rear fuel filler
    £3.00
    This is my new injection moulded fuel recess and one of those parts that I think just finishes off a scale land rover. I had quite a lot of feedback from my resin version so applied that input to the new version. Firstly some people found it tricky to cut out a perfect hole in the rear, so the new version has a front lip and flange. This does require a bigger hole being cut in the body, but the upside is you get a perfect recess shape, and any filling that needs doing is done on the flat of the body...
    Details
  • Land Rover Side Door Handle
    Land Rover Side Door Handle
    £2.00
    This is just another one of those detail pieces for people that want to turn the later body into an earlier one, that being the recessed side door handles. This is my new injection moulded version which is the same as the old resin one, just in HIPS which sticks much better to the body. Each handle comes in two parts, the recess and handle, because I found when fitting on, to just finish it off you really needed to smooth around the inner recess where it met the body and with the handle in place...
    Details
  • Land Rover Wing Vent Covers Type 1
    Land Rover Wing Vent Covers Type 1
    £3.00
    With so many trucks around I thought I would do a range of wing vent covers bases as closely as I could get on the real versions, just to give people a choice when it comes to dressing their truck. This version comes with struts running the length, which I noticed some of the more bling trucks had and come as a set of three so you can have them all to match if you want, or ditch one if your using a wing or side snorkel. For best results I found spray with a plastic primer first, (I use Hycote plastic...
    Details
  • Land Rover Wing Vent Covers Type 3
    Land Rover Wing Vent Covers Type 3
    £3.00
    With so many trucks around I thought I would do a range of wing vent covers bases as closely as I could get on the real versions, just to give people a choice when it comes to dressing their truck. This version comes with a square mesh pattern as well as tiny bumps to imitate fixing bolts round the lip and still come as a set of three so you can have them all to match if you want, or ditch one if your using a wing or side snorkel. For best results I found spray with a plastic primer first, (I use...
    Details
  • Landrover Bonnet Bulge Type 1.
    Landrover Bonnet Bulge Type 1.
    £5.00
    My latest and finally perfected later model bonnet bulge conversion for the Gelande body. It now comes in two main pieces, a CNC cut bonnet fill plate and a vac formed bulge, (this does need trimming prior to fitting) and I also included a length of hips sheet that can be cut up and stuck underneath for reinforcement. As for fitting you can see in the series of pictures, its as simple as lay the cnc cut fill plate onto the bonnet using the tabbed section at the back for positioning then mark round...
    Details
  • Landrover Rear Door Handle
    Landrover Rear Door Handle
    £1.25
    This is the first of my new injection moulded parts, the rear door handle. Its made from white HIPS which has several benefits over resin, the main being it sticks much better to the body as they are both made of it. I have included a picture of one sprayed red so you can see the detail better, as it doesn't show up on the white one very well. It comes in two parts, the recess and handle joined to the spur so they do need cutting and just finishing off prior to attaching. I have also included a die...
    Details
  • Landrover Rear Wheel Carrier Type 1
    Landrover Rear Wheel Carrier Type 1
    £3.50
    This is the first of my new injection moulded rear wheel carriers. The design has been tweaked so it now fits with the rear door handle in place, and comes in pieces so the frame and mounting brackets are separate meaning if you want it to be able to swing open it can, or just be glued closed. Of course being made from HIPS the mounting brackets can be stuck directly to the body with poly cement and I have included dome head bolts for if you want it to open, all you need to to is drill the frame...
    Details
  • Landrover Rear Wheel Carrier Type 2
    Landrover Rear Wheel Carrier Type 2
    £3.50
    This is the second of my new injection moulded rear wheel carriers and like the first the design has been tweaked so it now fits with the rear door handle in place and comes in pieces so the frame and mounting brackets are separate meaning if you want it to be able to swing open it can, or just be glued closed. Of course being made from HIPS the mounting brackets can be stuck directly to the body with poly cement and I have included dome head bolts for if you want it to open, all you need to to is...
    Details
  • Landrover Rear Wheel Carrier Type 3
    Landrover Rear Wheel Carrier Type 3
    £3.50
    This is the third of my new injection moulded rear wheel carriers, but unlike the other two this offsets the spare wheel to the right side as I am also working on a jerry can bracket and frame which will mount on the left. Like the other two the frame and mounting brackets are separate meaning if you want it to be able to swing open it can, or just be glued closed. Of course being made from HIPS the mounting brackets can be stuck directly to the body with poly cement and I have included dome head...
    Details
  • Landrover Rear Wheel Cover Type 1
    Landrover Rear Wheel Cover Type 1
    £6.00
    This is the first of my new spare wheel covers, which I designed myself and are vacuum formed from black HIPS, so can be painted or just left black. While they fit on my rear wheel carriers, they are only held on with a bolt so they can really fit any car, hence the different sticker options. They can be used as an empty case if you just want that scale look, or will also hold a full size hub and tyre up to 100mm, which can also still fit onto my rear wheel carrier. The two halves just push snuggly...
    Details
  • Landrover Rear Wheel Cover Type 2
    Landrover Rear Wheel Cover Type 2
    £6.00
    This is the second of my new spare wheel covers, which I designed myself and are vacuum formed from black HIPS, so can be painted or just left black. While they fit on my rear wheel carriers, they are only held on with a bolt so they can really fit any car, hence the different sticker options. They can be used as an empty case if you just want that scale look, or will also hold a full size hub and tyre up to 100mm, which can also still fit onto my rear wheel carrier. The two halves just push snuggly...
    Details
  • Landrover Rear Wheel Cover Type 3
    Landrover Rear Wheel Cover Type 3
    £6.00
    This is the third of my new spare wheel covers, which I designed myself and are vacuum formed from black HIPS, so can be painted or just left black. While they fit on my rear wheel carriers, they are only held on with a bolt so they can really fit any car, hence the different sticker options. They can be used as an empty case if you just want that scale look, or will also hold a full size hub and tyre up to 100mm, which can also still fit onto my rear wheel carrier. The two halves just push snuggly...
    Details
  • Landrover Snorkel Type 1
    Landrover Snorkel Type 1
    £3.00
    This is my new Type 1 snorkel, and as the old mold had worn out it was ready for injection molding, so decided not to just redo the old version, but went with the latest version that I saw on the special edition land rovers, which looked a bit sleeker. It now comes with pre threaded holes in the back and M3 bolts for fixing to the wing, and no longer has the flange on the back so it fits vac formed bodies without any fiddling, like removing the old flange, which was a real pain. It also fits the...
    Details
  • Landrover Snorkel Type 2
    Landrover Snorkel Type 2
    £3.50
    This is my new version type 2 snorkel which now has more realistic detail thanks to injection moulding and fits on top of the wing just like the old one instead of the side, and has an air filter mounted at roof level. I have also tweaked the wing mounting plate which now screws into place and also fits both the older D90 body and the new Team Raffee ones. It comes in nine parts and to keep production costs to a minimum I have trimmed off most of the sprue, but there is still a bit of fine clean...
    Details
  • Landrover Snow Cowl wing vent cover.
    Landrover Snow Cowl wing vent cover.
    £2.50
    These are my new Snow cowls as they are normally referred to which have been redesigned from the ground up so now they fit the Gelande, Team Raffee and other vac formed bodies. They are a slightly new shape with much more finer detail than before and now come in two parts which allows them to fit all the different bodies and I have complied a simple 'how to' fit them guide on my facebook page. https://www.facebook.com/donjarrdesigns/ Plus as they now fit in place via a small screw, you can swap them...
    Details
  • Landrover Sports Seat
    Landrover Sports Seat
    £6.50
    This is my new sports seat which I made for my new Team Raffee defender build. It will also fit the gelande, but you will need to cut away the old seat base, hence I have also made a gelande direct replacement back only, (listed separately) plus this seat will fit any other 1:10 scale rc car or truck pending room. I based the design on the Recaro Sportster as this is the seat that's most used in custom land rovers, but tweaked my design to fit the body while being easy to injection mould at the same...
    Details
  • Landrover Wheel Arches Type 1
    Landrover Wheel Arches Type 1
    £10.00
    These are my new wheel arches which I made to fit my Team Raffee body, as I wanted something a bit more beefy than the ones that came with it, and also both slightly wider and deeper to clear larger diameter tires. They also fit the older gelande style body as well, but the old wheel arches will need removing first for them to fit. I found for fixing them on, a pin in my drill was the perfect size for a pilot hole going though both the resin and body then open the hole in the arch out with a slightly...
    Details
  • Landrover Wheel Arches Type 2
    Landrover Wheel Arches Type 2
    £10.00
    This is my new set of wheel arches made to fit the Gelande body, which are squarer and not quite so chunky as my other set, and while made for the gelande body they also fit the team raffee one as well. When fitting to the gelande body the old wheel arches do need cutting off first. For fixing them on a pin in my drill was the perfect size for a pilot hole going though both the resin and body then open the hole in the arch out with a slightly bigger drill bit prior to screwing the screw in. Being...
    Details
  • Rear Bumper Type 1
    Rear Bumper Type 1
    £3.50
    This is a replacement rear bumper for the D90 styrene body. So I bought a landrover d90 body and found while the bumper that came with it was ok, it was a bit flexi and lacked some detail, so set about making a more detailed version from a local guys real one. It comes with a pair of die cut rubber mud flaps just to finish it off, and while its only cast in resin it's quite strong, but if your into doing any serious towing, then I suggest a strip of metal be placed behind it to bolt between your...
    Details
  • Rear Bumper Type 2
    Rear Bumper Type 2
    £3.00
    This is a replacement rear bumper for the D90 styrene body, which I made to match the type 2 front bumper I make. Its not really based on anything, I just incorporated the design of the front one into one for the rear and included matching end sections and large step which has checker plate just to finish off the look. While it doesn't fit directly to the body, its fitted to the chassis so will require you to fit it as you see best. When fixing resin it does require a pilot hole drilling prior to...
    Details
  • Wing Vent Covers Type 2
    Wing Vent Covers Type 2
    £2.50
    I noticed when it came to wing vent covers the only choice was the ones that came with the D90 body, so after looking through some pictures decided to make a couple of different versions. This was made to look like the top grills that have the four smaller vent slots in, the back being the highest getting lower towards the front one. These come in beige resin ready for you to paint.
    Details
  • WMIK Front Bumper type 1
    WMIK Front Bumper type 1
    £3.00
    This is a replacement front bumper for the D90 styrene body and also one of my new parts for the WMIK version of the landrover and comes with more surface detail and a towing recess like the WMIK version has, but can also be used on a standard land rover too. While it doesn't fit directly to the body, its fitted to the chassis and does require a pilot hole drilling into the resin prior to screwing on as trying to screw directly into the resin without a pilot hole just a bit smaller than the screw...
    Details
  • WMIK Front Grill
    WMIK Front Grill
    £3.00
    This is a replacement grill for the styrene landrover D90 body that's widely available. This is one of my new parts for the WMIK version, and while its not an exact copy as I had to tweak it slightly so it fitted to the body with no modifications. This comes in three parts and unlike the other two grills where the headlamp surrounds sit proud of the body these sits flush as per the proper WMIK ones. It does still use the original clear plastic headlamp part, but you need to drill out the two smaller...
    Details
  • WMIK Wing air intake
    WMIK Wing air intake
    £2.50
    This is one of my parts for the Land Rover WMIK version and I personally really liked the design, so set about scaling it down and building a 3d model as close as I could get to the pictures I found. I have to admit now it is done, while not one of the most wanted parts, I still love the look of it. You get a pair of these because while there is no vent recess on one side of the D90 body, on the real vehicles they seem to have then fitted both sides, so the option is there to fit either one or both....
    Details
Product Added to your Cart
x

-------- OR --------