35 product(s) found for "1:10 Universal Accessories"
  • .75 siliver nylon cord
    .75 siliver nylon cord
    £2.50
    This is for a 5 metre length of 0.75mm silver cord, which is perfect for imitating scale steel cable on your trucks model winch. I have included a picture of it installed on my own winch so you cna see how much better it looks. Also being nylon it is really strong so you can pull your truck from any sticky situation with ease. This sale is for a 5 metre length of silver nylon cord.
    Details
  • Bed Roll
    Bed Roll
    £2.50
    This is the first of my new small accessories, which don't really do anything except add detail to your scale truck, this being a pair of bed rolls. I wanted to add a bit more detail than the others I have seen for sale so I set about scanning a clip buckle then scaled it down and made a mould so I could injection mould them, and while nothing major, personally I think it just adds that extra detail that really finishes off a good scale truck. These come flat pack to save on bulky postage, and you...
    Details
  • Cargo Net Faded Tan
    Cargo Net Faded Tan
    £2.50
    This is new cargo net dyed to look old and can be used on cars, boats and trucks for either decoration or holding stuff down. It has a hole size fully stretched out of 5mm square. You get a piece 40cm x 30cm.
    Details
  • Cargo Net Green
    Cargo Net Green
    £2.50
    This is new camo green cargo net which can be used on cars, boats and trucks for either decoration or holding stuff down. It has a hole size fully stretched out of 5mm square. You get a usable piece 40cm x 30cm.
    Details
  • Euro Pallet Size 1
    Euro Pallet Size 1
    £4.00
    This is the first of my new range of scale Euro sized pallets, starting with the eur-1 which is a scaled down version of the 800 x 1200mm, meaning it is 80 x 120mm and all hand made from wood. I also machined a couple of tiny brass stamps so I could heat emboss details on the side just like the real ones. PLEASE NOTE: You only get ONE pallet, I have included several pictures showing it from different angles and with crates on just to show you what it can look like when in use.
    Details
  • Euro Pallet Size 2
    Euro Pallet Size 2
    £4.50
    This is the second of my new range of scale Euro sized pallets and the eur-2 which is a scaled down version of the 1200 x 1000mm, meaning it is 120 x 100mm and also the standard sized pallet as used in the USA, and like the others all hand made from wood. I also machined a couple of tiny brass stamps so I could heat emboss details on the side just like the real ones. PLEASE NOTE: You only get ONE pallet, I have included several pictures showing it from different angles and with crates on just to...
    Details
  • Euro Pallet Size 6
    Euro Pallet Size 6
    £2.50
    This is the third and final of my new range of scale Euro sized pallets and this being the eur-6 which is a scaled down version of the 800 x 600mm, meaning it is 80 x 60mm and the smallest of them all, and like the others all hand made from wood. I also machined a couple of tiny brass stamps so I could heat emboss details on the side just like the real ones. PLEASE NOTE: You only get ONE pallet, I have included several pictures showing it from different angles and with crates on just to show you...
    Details
  • Fuel Cell Type 1
    Fuel Cell Type 1
    £3.00
    This is a 1:10 th scale fuel cell based on pictures I found online, and while it doesn't do anything, it can just finish a scale truck of car off perfectly. Dimensions: 55mm Deep. 72mm Wide. 20mm high. This comes complete with a bit of imitation braided fuel hose, and is hollow cast in beige resin ready for you to paint.
    Details
  • Gas cylinder Type 1
    Gas cylinder Type 1
    £2.75
    This is scale 7kg gas cylinder which is ideal for a roof rack or trailer accessory, and comes complete with gas valve and white on clear waterslide decals for either butane or propane pending what colour you want to paint it. I have also included pictures of one I painted that I needed old and tatty looking. This item is hollow cast and open from the bottom, and comes in beige resin ready for you to paint.
    Details
  • Ground Anchor Type 1
    Ground Anchor Type 1
    £5.00
    This is the one of my new range of Metal Parts, this being a Ground Anchor which I tried to get as scale looking as I could, while keeping it fully functional. This is laser cut stainless steel and comes semi shiny so looks more like the galvanised ones I found in the 4x4 shops and can be left as it is, or painted it's up to you and while only quite thin in places I have tested them and found they will lift 15kg without breaking so ample for pulling your truck out the mud. Main body is 100mm from...
    Details
  • Ground Anchor Type 2
    Ground Anchor Type 2
    £5.00
    This is the one of my new range of Metal Parts, this being a Ground Anchor which I tried to get as scale looking as I could, while keeping it fully functional. This is laser cut stainless steel and comes semi shiny so looks more like the galvanised ones I found in the 4x4 shops and can be left as it is, or painted, it's up to you and while only quite thin in places I have tested them and found they will lift 15kg without breaking so ample for pulling your truck out the mud. Main body is 100mm from...
    Details
  • Jerry Can Type 1
    Jerry Can Type 1
    £2.50
    This is my updated Jerry can, which as the old mould was wearing out I took the opportunity to tweak it just slightly. Its the same basic can, I just moved the spout to the side and changed the old screw cap for something that looks like the more familiar flip top. I also made a new handle which looks more like the real thing and added engraving to the side. Its still hollow and light weight, just looks a bit better than the old one did if you are going for a more detailed finish, this just finishes...
    Details
  • Luggage Straps Grey
    Luggage Straps Grey
    £2.50
    These are my new luggage straps, which use the same scale injection moulded buckles as my Bed Roll. You get six buckles and two metres of strapping, so you can make straps to fit whatever you want, short or long. You need to fix one end ot the strap through the single slot then you can thread the other end through the two slots allowing you to gently pull it tight around whatever you want to hold down. Due to the small size I found it easiest to stick a bit of sellotape to the end of the strap then...
    Details
  • Luggage Straps Orange
    Luggage Straps Orange
    £2.50
    These are my new luggage straps, which use the same scale injection moulded buckles as my Bed Roll. You get six buckles and two metres of strapping, so you can make straps to fit whatever you want, short or long. You need to fix one end ot the strap through the single slot then you can thread the other end through the two slots allowing you to gently pull it tight around whatever you want to hold down. Due to the small size I found it easiest to stick a bit of sellotape to the end of the strap then...
    Details
  • Luggage Straps Yellow
    Luggage Straps Yellow
    £2.50
    These are my new luggage straps, which use the same scale injection moulded buckles as my Bed Roll. You get six buckles and two metres of strapping, so you can make straps to fit whatever you want, short or long. You need to fix one end ot the strap through the single slot then you can thread the other end through the two slots allowing you to gently pull it tight around whatever you want to hold down. Due to the small size I found it easiest to stick a bit of sellotape to the end of the strap then...
    Details
  • Oil Drum
    Oil Drum
    £2.50
    This is was just one of those parts that came along as I needed to fill my roof rack up a bit, and as my truck is based on a long range explorer vehicle a spare drum or can of oil would be a must. Dimensions are 45mm high without handle, and 29mm diameter, so in real terms it's about a 7 gallon drum.
    Details
  • Sand Ladders Type 1
    Sand Ladders Type 1
    £3.00
    This is for a PAIR of my NEW profiled sand ladders which are now slightly wider and instead of just being flat have a proper profile just like you find on the real full size version. They are 150mm long, 46mm wide and roughly 2.5mm thick. You get a pair of these in beige resin ready for you to paint. PLEASE NOTE: These are sand ladders and used for getting your scale truck out of either muddy, sand or any loose surface area, they are not bridging ladders and not made to bridge a gap and take the...
    Details
  • Sand Ladders Type 3
    Sand Ladders Type 3
    £3.00
    While these are listed as sand ladders, they are actual ly called 'Bridging Ladders' as they tend to be thicker and sturdier and used for bridging deep ruts or ditches, hence the name. This is for a PAIR of what are commonly known as bridging ladders. These are a new version I have done which I spotted when looking on the internet and thought with so many people building scale trucks it would be nice to offer a selection of parts to give people a choice. They are 150mm long, 40mm wide and roughly...
    Details
  • Sankey 3/4 ton trailer chassis
    Sankey 3/4 ton trailer chassis
    £12.50
    This is the new version of my Sankey Trailer chassis, which as the old mould wore out I wanted to tweak slightly to make it look a bit more like the real one. It now comes with a screw down prop handle and two side mounting plates which can be glued or screwed onto the main frame allowing you to fit a fixed axle in place. This is 130mm wide, 240mm long including towing eye. This comes in beige resin ready for you to paint.
    Details
  • Tarpaulin beige
    Tarpaulin beige
    £3.00
    This is for a piece of beige material which scale wise looks like tarpaulin and like the green is a heavier material but the weave on this is much looser, giving the impression its old and worn, and while new a bit of dirt here and there and it could look well used. Being a looser weave, even though its thicker, it still drapes nicely, which with scale trucks is the main thing. It hand or machine sews really nicely allowing you to hem it if you want to put a pull cord through to pull tight, or fit...
    Details
  • Tarpaulin Camo Green
    Tarpaulin Camo Green
    £3.00
    This is for a piece of camo green material which scale wise looks like tarpaulin, and like the beige is now a heavier material with slightly looser weave as this seems to drape so much better, which in turn gives it a much more scale appearance, which with scale models is the main thing. It hand or machine sews really nicely allowing you to hem it if you want to put a pull cord through to pull tight, or fit eyelets to fasten it down. It's really one of those products that only your imagination limits...
    Details
  • Tool Box Type 1
    Tool Box Type 1
    £2.50
    This was actually modelled off my own tool box, and thought it was quite a nice extra item to have on either a trailer or sitting in the back of your pick up on the flatbed. This item is hollow cast and open from the bottom, and comes in beige resin ready for you to paint.
    Details
  • Tool Box Type 2
    Tool Box Type 2
    £2.50
    This is just another version of tool box which I saw while at a classic car show, and while not that old, I liked the shape so set about making one. Not an essential item, but can just finish a truck off. This item is hollow cast and open from the bottom, and comes in beige resin ready for you to paint.
    Details
  • Towing Cable Type 1
    Towing Cable Type 1
    £2.50
    All my towing ropes and cables now come with a proper machine swaged ends, meaning they are stronger than ever. This is the first in my new range of towing cables and t his version uses stainless steel cable with a machine swaged thimble at each end and is 12 inches long and comes with yellow tubing over each end and the red marker in the middle. It can be used for towing or lifting or just about anything else you want to use it for as its super strong and can withstand all the towing and jerking...
    Details
  • Towing Chain Type 1
    Towing Chain Type 1
    £2.50
    This is a towing chain and I noticed some towing chains didn't actually have a hook as such on the end but a sort of hook with spring loaded locking bit to stop the hook coming off, so therefore set about making a suitable scale version. This version uses an older looking bronze chain and including the two sprung hooks is 12" long. It can be used for towing but can only pull about 2kg, and if the chain is jerked can open the links causing it to break. Most people however tend to just drape these...
    Details
  • Towing Chain Type 2
    Towing Chain Type 2
    £2.50
    This is a towing chain and I noticed some towing chains didn't actually have a hook as such on the end but a sort of hook with spring loaded locking bit to stop the hook coming off, so therefore set about making a suitable scale version. This version uses my galvanised effect chain and including the two sprung hooks is 12" long. It can be used for towing but can only pull about 2kg, and if the chain is jerked can open the links causing it to break, however most people just tend to drape these around...
    Details
  • Towing Rope Type 1
    Towing Rope Type 1
    £2.50
    All my towing ropes and cables now come with a proper machine swaged ends, meaning they are stronger than ever. This is a 10 inch length of 3mm scale nylon rope with a thimble swaged to each end, then to finish it off like the ones from the 4x4 accessory shop with yellow tube covering each end and a red marker in the middle. I now do a version of this in soft cotton which if your just using for cosmetic purposes the cotton one drapes much nicer and more realistically than this, but is not so strong....
    Details
  • Towing Rope Type 2
    Towing Rope Type 2
    £2.50
    All my towing ropes and cables now come with a proper machine swaged ends, meaning they are stronger than ever. This is a 10 inch length of 3mm soft cotton twisted cord and while it can pull your truck out of a sticky situation I picked cotton for this version as unlike the nylon it drapes so much more realistically, so if your going for a true scale truck look, this drapes so much better around the bumper than the nylon, plus being cotton can be made to look old and dirty if you want. It still has...
    Details
  • Towing Rope Type 3
    Towing Rope Type 3
    £2.50
    All my towing ropes and cables now come with a proper machine swaged ends, meaning they are stronger than ever. This is a 10 inch length of 2mm nylon cord, but a bit more modern than the other two I sell and while it can pull your truck out of any sticky situation it also drapes nicely and holds its position to help it look more scale realistic when on your truck. These have been tested to lift 12kg so more than enough to pull your truck out of any sticky situation.
    Details
  • Tree Saver Strap Type 1
    Tree Saver Strap Type 1
    £2.50
    This is what they call a tree saver strap, which in real life is wrapped around a tree to pull your truck out of trouble, but unlike the steal cable on the winch it doesn't damage the tree, hence its name. It's made from heavy duty nylon strap and thermally welded together, and a few finishing touches to look like the one in the 4x4 shop. This now comes in three colours just to give people a bit of choice when dressing their truck, and is 10 inches long.
    Details
  • Tree Saver Strap Type 2
    Tree Saver Strap Type 2
    £2.50
    This is what they call a tree saver strap, which in real life is wrapped around a tree to pull your truck out of trouble, but unlike the steal cable on the winch it doesn't damage the tree, hence its name. It's made from heavy duty nylon strap and thermally welded together, and a few finishing touches to look like the one in the 4x4 shop. This now comes in three colours just to give people a bit of choice when dressing their truck, and is 10 inches long.
    Details
  • Tree Saver Strap Type 3
    Tree Saver Strap Type 3
    £2.50
    This is what they call a tree saver strap, which in real life is wrapped around a tree to pull your truck out of trouble, but unlike the steal cable on the winch it doesn't damage the tree, hence its name. It's made from heavy duty nylon strap and thermally welded together, and a few finishing touches to look like the one in the 4x4 shop. This now comes in three colours just to give people a bit of choice when dressing their truck, and is 10 inches long.
    Details
  • Van Vault Type 1
    Van Vault Type 1
    £4.00
    This is a scale replica van or truck vault, and was actually modelled off a guy down the roads who kindly let me take some details of his. Dimensions 97mm Wide 57mm Deep (excluding handle) 25mm High This item is hollow cast and open from the bottom, and comes in beige resin ready for you to paint and also included is a black water slide decal if you want to apply it.
    Details
  • Winch Type 1
    Winch Type 1
    £2.50
    This is a solid cast static winch for those that just want a winch, but not a working one. It comes in four parts and can be used wherever you want, this one I fixed to the front bumper of my blazers, but the choice is yours. All parts come in beige resin ready for you to paint.
    Details
  • Winch Type 2
    Winch Type 2
    £2.50
    This is a solid cast static winch for those that just want a winch, but not a working one. It comes in four parts and can be used wherever you want, this one I fixed to my new side winch arm on my blazer. but you can fit it to either a front or rear bumper the choice is yours. All parts come in beige resin ready for you to paint.
    Details
Product Added to your Cart
x

-------- OR --------