11 product(s) found for "Model Boat Accessories"
  • Cabin Door Type 1
    Cabin Door Type 1
    £2.50
    This is a cabin door which was just one of those parts I wanted to make for my boat to finish it off. The master copy was made using wood with a really deep grain so the grain shows on the finished door to simulate wood. Door dimensions. 87mm high 38mm wide This sale is for one door in wood effect brown resin.
    Details
  • Hand Rail Long
    Hand Rail Long
    £2.50
    This is the longest of all my hand rails, which I used on another boat I restored, and like the other lengths, the prototype was made from wood, so the resin casts retain the surface texture of the wood. I have included a picture of them on my boat to show what they can look like when fitted. 1:20th Handrail dimensions. Length 170mm Height 9mm This sale is for 2 resin cast Hand Rails which come in wood effect brown resin.
    Details
  • Hand Rail Meduim
    Hand Rail Meduim
    £2.00
    This is the medium size hand rail, which I used on another boat I restored, and like the other lengths, the prototype was made from wood, so the resin casts retain the surface texture of the wood. I have included a picture of them on my boat to show what they can look like when fitted. 1:20th Handrail dimensions. Length 125mm Height 9mm This sale is for 2 resin cast Hand Rails which come in wood effect brown resin.
    Details
  • Hand Rail short
    Hand Rail short
    £1.50
    This is the shortest version of my hand rails, which can be used as a roof top rail or vertical handrail, pending what you need. Like the other lengths, the prototype was made from wood, so the resin casts retain the surface texture of the wood. I have included a picture of them on my boat to show what they can look like when fitted. 1:20th Handrail dimensions. Length 85mm Height 9mm This sale is for 2 resin cast Hand Rails which come in wood effect brown resin.
    Details
  • Life Belt Type 1
    Life Belt Type 1
    £2.50
    This was just one of those essential bits for finishing off any model boat, a life belt and wall mounted stand. However I couldn't find an off the shelf version just like this in 1:20th scale so set about making one and a stand to attach it to the boat so it could hold both the belt and rope. Dimensions: Width = 36mm Depth on mount= 8mm This comes in beige resin ready for you to paint.
    Details
  • Life Raft Type 1
    Life Raft Type 1
    £4.00
    This was just one of those essential bits for finishing off any model boat, a life raft and stand. However I couldn't find an off the shelf version just like this in 1:20th scale so set about making one myself, based on photos of one I found on a boat. Dimensions: Length = 76 Width = 32mm Height on Stand= 38mm This comes in beige resin ready for you to paint.
    Details
  • Map Pack 1
    Map Pack 1
    £2.50
    As I like my radio controlled boats to have a bit more detail on the inside as well as out, I fitted out the bridge out with all the necessary details, along with a map table, and scaled down maps. Each Map pack comes with nine different proper scale nautical maps the largest being 50mm x 85mm, and the smallest is 45mm x 45mm, and I used them with a 1:20 scale boat, but could be used on scales to either side of this. These come pre cut to size, and are professionally printed.
    Details
  • Map Pack 2
    Map Pack 2
    £2.50
    As I like my radio controlled boats to have a bit more detail on the inside as well as out, I fitted out the bridge out with all the necessary details, along with a map table, and scaled down maps. Each Map pack comes with nine different proper scale nautical maps the largest being 50mm x 85mm, and the smallest is 45mm x 45mm, and I used them with a 1:20 scale boat, but could be used on scales to either side of this. These come pre cut to size, and are professionally printed.
    Details
  • Model Boat fenders type 1
    Model Boat fenders type 1
    £2.50
    These are something a fellow boat enthusiast asked if I could make as he couldn't find any just the right size for his boat, so set about making them to the size he wanted from pictures I found on the Internet. This is for a pack of 6 fenders which come undrilled as pending what size rope you want to attach them with. As for scale they don't really have one, as you could use them on a smaller boat so they look bigger, or a bigger boat so they look smaller, which will be up to you. Dimensions: Diameter...
    Details
  • Model Boat Navigation Lights
    Model Boat Navigation Lights
    £2.00
    These are something I made years ago after someone asked me about them, and stopped doing them when the mould wore out, but while having a clear out recently I found the prototype ones and thought I would make a few and see if they would help anybody out who was making a model boat. This is for a pack of 2 navigation lights, one Port and one Starboard and come complete with coloured lens. Not really sure of the scale, but I have used them on a 1:20th scale boat, but something like this can be used...
    Details
  • Rope Cleats
    Rope Cleats
    £1.00
    These are just those little bits that finish off any model boat, but I couldn't find any like I had seen on the local pleasure and fishing boats so made some myself. This is for a pack of 8 rope cleats which come undrilled as pending how you want to fix them on. Dimensions: Width = 21mm Height= 5mm This comes in beige resin ready for you to paint.
    Details
Product Added to your Cart
x

-------- OR --------